View basket “LEYLAND High Gloss Brilliant White 2.5L” has been added to your basket.
Previous product
Back to products
LEYLAND Wood & Metal Undercoat 2.5L
£0.00 (Excl. VAT)
Next product
LEYLAND Super Leytex Brilliant White 15L
£0.00 (Excl. VAT)
LEYLAND Hard Wearing Matt Brilliant White 5L
£0.00 (Excl. VAT)
Leyland Trade Hardwearing Matt is a low VOC content matt finish. A scrubbable product which is thinned with water and is applied by brush, roller, airless spray or HVLP spray. Matt emulsion is a decorative coating providing a flat finish for use on walls and ceilings.
- Suitable for interior use.
- Touch dry in 1-2 hours and recoatable after 4 hours.
Wipeable products are suitable for light traffic areas where occasional cleaning is required. Can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.
* Colours on screen may vary from actual paint
Free delivery for orders £50 and over (UK mainland - Express, 1-2 working days)
Description
Ensure surface to be painted is sound, clean, dry and free from grease. Remove all loose or defective paint. Seal absorbent surfaces with a solution of up to 1 part water to 4 parts Hardwearing Matt. Prime bare timber and metal surfaces with the appropriate Leyland Primer. Rub down sound previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly before applying a pre-coat of Leyland Trade Acrylic Primer Undercoat. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Application
Stir well before use and apply by brush, roller or spray. When using a roller, use a medium pile synthetic type. Do not overfill the tray. Ensure roller is loaded evenly. If using a brush, load generously. Apply liberally and evenly; avoid overspreading. Under normal conditions, allow 4 hours before applying a second coat if required. Do not apply when air or surface temperature is below 10°C.
Coverage
1 litre will cover approximately 12 square metres, depending on the nature and porosity of the surface. Strong or contrasting colours may require additional coats. When using more than one can of a colour in the same room, intermix before use.
Additional information
Brand | LEYLAND |
---|---|
Application Method | Airless Spray, Brush, HVLP Spray, Roller |
Base | Water |
Cleanup | Detergent, Water |
Color | Brilliant White |
Colour type | White |
Coverage | Up to 12sq/m per litre |
Recoatable | 4-8 hours |
Size | 5L |
Suitable for | Exterior Use, Interior use |
Thinning | Water |
VOC level | Low |
Touch dry | 1-4 hours |
Finish | Gloss |
Scrubbability | Washable |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
DULUX TRADE Diamond Eggshell Pure Brilliant White 5L
£0.00 (Excl. VAT)
Dulux Trade Diamond Eggshell is a low VOC content eggshell finish. A washable product that is applied by brush or roller and is suitable for interior use.
Recoatable in 4-6 hours, diamond eggshell is a tough, durable mid sheen finish for wood and metal also ideal for medium traffic areas such as lounges and bedrooms.
Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer.
* Colours on screen may vary from actual paint
MACPHERSON Eclipse Emulsion Brilliant White 10L
£0.00 (Excl. VAT)
Macpherson Eclipse is a low VOC content matt finish. It is a product which is thinned with water and is applied by brush, roller, airless spray or HVLP spray. It is suitable for interior use. It is touch dry in 2 hours and recoatable after 4 hours. Matt emulsion is a decorative coating providing a flat finish for use on walls and ceilings. It can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.
* Colours on screen may vary from actual paint
MACPHERSON Eclipse Emulsion Brilliant White 15L
£0.00 (Excl. VAT)
Macpherson Eclipse is a low VOC content matt finish. It is a product which is thinned with water and is applied by brush, roller, airless spray or HVLP spray. It is suitable for interior use. It is touch dry in 2 hours and recoatable after 4 hours. Matt emulsion is a decorative coating providing a flat finish for use on walls and ceilings. It can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.
* Colours on screen may vary from actual paint
DULUX TRADE High Gloss Pure Brilliant White 2.5L
£0.00 (Excl. VAT)
Dulux Trade High Gloss is a high VOC content gloss finish and is a washable oil based product that is applied by brush. This product is suitable for interior and exterior use and is touch dry in 4-6 hours and recoatable after 16-24 hours.
Gloss is a tough, durable high sheen finish for wood and metal, providing good resistance to knocking and scuffing. Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer and undercoat.
* Colours on screen may vary from actual paint
LEYLAND Contract Matt Emulsion Brilliant White 10L
£0.00 (Excl. VAT)
Leyland Trade Contract Matt is a low VOC content matt finish. Thinned with water and applied by brush, roller, airless spray or HVLP spray.
- Suitable for interior use.
- Touch dry in 1-2 hours and recoatable after 3-4 hours.
Matt emulsion is a decorative coating providing a flat finish for use on walls and ceilings. Can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.
* Colours on screen may vary from actual paint
DULUX TRADE Undercoat Pure Brilliant White 5L
£0.00 (Excl. VAT)
Dulux Trade Undercoat is a high VOC content finish that is applied by brush or roller and is suitable for interior and exterior use. This product is touch dry in 2-6 hours and recoatable after 6-16 hours.
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry) and free from all defective or poorly adhering material such as dirt, grease and wax. New or bare surfaces should be primed appropriately.
* Colours on screen may vary from actual paint
DULUX TRADE Undercoat Pure Brilliant White 2.5L
£0.00 (Excl. VAT)
Dulux Trade Undercoat is a high VOC content finish that is applied by brush or roller and is suitable for interior and exterior use. This product is touch dry in 2-6 hours and recoatable after 6-16 hours.
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry) and free from all defective or poorly adhering material such as dirt, grease and wax. New or bare surfaces should be primed appropriately.
* Colours on screen may vary from actual paint
Reviews
There are no reviews yet.